How To Order
Panel Overview
Coverage & Profile
Rib To Rib Distance: 12"
Rib Height: 1 -1/4’’
Panel Length: 3' to 51'
Net Coverage: 36" (3FT)
Slope: 1:12 Minimum Roof Slope
Material & Finish
Material Type: Standard galvalume (zincalume) or galvanized available for special orders
Available Gauges: 26 Standard, 24, 22 available for special order
Fasteners: Exposed Fasteners
Application: Over solid substrate or open framing
Finish: Standard galvulame bare or SMP available for special orders
Trim/Flashing: Standard Metroll universal trim/flashing & custom available for special orders in bare and color
Finish & Color
Installation Quick Start
Attachment Detail
1. Refer to trim connection details to determine order of trim and panel placement.
2. Align the edge of the first sheet along the edge of the roof. The panel should hang over a maximum of 2” at the eave and should not extend past the center of the ridge space.
3.After the first panel is properly placed, use the recommended screws to secure the panel.
4. Lay down the next two panels and then check the alignment at the eave and ridge to ensure the panels are square.
Fastening Patterns
Ends Of Panel
(Supports at Ends / Eaves / Ridges)
Ensures full anchorage and resistance to uplift or movement
Field Of Panel
(Intermediate Supports)
Optimized for structural performance and material efficiency
Benefits of PBR
One of the main advantages of PBR panels is their durability and strength.
The raised ribs on the panel provide extra support and protection against weather and other environmental factors.
They are also low-maintenance and have a long lifespan, making them a cost-effective choice for building owners and contractors
Request A PBR Quote
Quotes remain valid for 24-Hours and may require re-quoting after that period.
Response time on quote request is 24-Hours.
Quote are Free of Charge
Please fill out the form below with as much detail as possible.